It is important to know the right way of waterproofing shoes

The winter can be harsh on leather, so it’s important to protect your shoes. In order to prevent water penetration, all waterproofing methods create a thin membrane on top of the leather. You can get the best waterproof shoes on our place.

You should examine your shoes to determine the kind of leather used and what other materials are in them. Look at the shoe box and note any specific cleaning instructions. Next, choose a waterproofing agent that was made for the particular type of leather.

Choose between semi-solid wax and spray for waterproofing footwear. Sprays work well, but can’t provide an adequate waterproofing layer. The sprays, that usually contain silicone, are not suitable for thin or delicate leather. This leather maker may recommend using a basic semisolid waterproofing shoe product.

You should “spot” test your footwear before beginning waterproofing. Choose a small area that’s hard to notice. This can be anywhere inside the shoe such as the underside the tongue. If there is any change in texture or color, or if the product appears damaged, you should not continue to use it. If you have any questions, please contact your shoe’s manufacturer.

If you have a good result, then waterproofing leather is possible. Waxy products can come in a variety of forms. Some are applied with a wax brush and others by rubbing on. For a product which is rubbed on, you should use a soft, smooth fabric. The directions will most likely instruct you to apply the waterproofing product more than once and in slow, circular movements.

When using a paintbrush, it is the same process, with one exception: you need to use circular movements slowly and apply slight pressure for the brush to reach deep cracks. Be sure to use a soft, specially designed brush. The experts usually suggest using a toothbrush to also waterproof fabrics.

With regards to the cracks on your leather shoes, you should pay close attention using a brush and a soft cloth. Also, any raised or cracked areas will need extra care. You can slather extra in these places to make sure it sinks deep. And rub a lot. It may be necessary to repeat the process three times or more to completely waterproof these areas.